Metal Handle Embosser - STOCK DESIGN

Metal Handle Embosser - STOCK DESIGN

$39.99
Part Number:EMB-ST-01

Choose Options

1 - SEAL SIZE
2 - HANDLE TYPE
3 - TYPSTYLE
4 - IMPRINT
5 - FIXED DIRECTION OF SEAL
6 - ADDITIONAL INSERTS (optional)
Quantity Pricing
Quantity
Price
  • 1 - 9
  • $39.99
  • 10 - 99
  • $33.99
  • 100+
  • $29.99
METAL HANDLE EMBOSSERS - "Stock Design" refers to seals which are: text only or text and a stock design or stock design only or stock text to create standard monogram

1 - Choose Your Seal Size:

o SIZE #1: 1-5/8" round - no additional charge

o SIZE #1.75: 1-3/4" round - additional charge

o SIZE #2: 2" round - additional charge

o SIZE #3: 1" x 2" rectangle - no additional charge

2 - Choose Your Handle:
if applicable, will replace handle included with the base cost

o HANDLE #SP4 : standard pocket
reach is approx 1" from edge of paper to center of design, nickel plated, includes pouch and measures approx 5" long x 4.25" high - included with stock seals - no additional charge

o HANDLE #SD5 : standard desktop
reach approx 1" from edge of paper to center of design, nickel plated and black epoxy finish, rubber feet, measures approx 4.5" wide x 5" high - included with custom seals
Upgrade option for stock seals:
additional charge

o HANDLE #DPB : both standard pocket AND standard desktop handle - Upgrade option: additional charge

o HANDLE #DPADD : add'l standard pocket OR standard desktop handle with original purchase or at later date - Upgrade option: add $15/each

o HANDLE #LR7 : 2.5" long reach
reach approx 2.5" from edge of paper to center of design - Upgrade option: additional charge
2" round seals only for Long Reach Handles - please be sure to specify size of design at time of order, otherwise artwork will be sized to the maximum usable area of the 2" die, (NOTE: this die will accommodate a 1-4 line return address or text only die)

o HANDLE #XR8 : 4.5" extra long reach
reach approx 4.5" from edge of paper to center of design - Upgrade option: additional charge
2" round seals only for Long Reach Handles - please be sure to specify size of design at time of order, otherwise artwork will be sized to the maximum usable area of the 2" die, (NOTE: this die will accommodate a 1-4 line return address or text only die)

o HANDLE #DG9 : Cast Desk Handle - decorative brass
reach approx 1.0" from edge of paper to center of design - Upgrade option: additional charge
cast desk seals have a protective felt base, measures approx 6" high x 2" wide x 4" long and weighs approx 24oz, 1-5/8" round or 1" x 2" rectangular seals only for Cast Handles - please be sure to specify size of design at time of order, otherwise artwork will be sized to the maximum usable area of the die

o HANDLE #DC1 : Cast Desk Handle - decorative chrome
reach approx 1.0" from edge of paper to center of design - Upgrade option: additional charge
cast desk seals have a protective felt base, measures approx 6" high x 2" wide x 4" long and weighs approx 24oz, 1-5/8" round or 1" x 2" rectangular seals only for Cast Handles - please be sure to specify size of design at time of order, otherwise artwork will be sized to the maximum usable area of the die

o HANDLE #DB2 : Cast Desk Handle - decorative black epoxy finish
reach approx 1.0" from edge of paper to center of design - Upgrade option: additional charge
cast desk seals have a protective felt base, measures approx 6" high x 2" wide x 4" long and weighs approx 24oz, 1-5/8" round or 1" x 2" rectangular seals only for Cast Handles - please be sure to specify size of design at time of order, otherwise artwork will be sized to the maximum usable area of the die

3 - Choose Your Typestyle:

(any of the below can be used for monograms either for the entire seal or center of seal)

o FOR ROUND SEALS - the only typestyles available on a curve (for Arcs) for round seals are all UPPER CASE BLOCK or all UPPER CASE ROMAN

§ TYPESTYLE #BL: ALL UPPER CASE BLOCK

§ TYPESTYLE #RM: ALL UPPER CASE ROMAN

o FOR RECTANGULAR SEALS - script and open typestyles are not recommended, they may be difficult to read and may fill in

§ TYPESTYLE #BL: ALL UPPER CASE BLOCK

§ TYPESTYLE #RM: ALL UPPER CASE ROMAN

§ TYPESTYLE #BK: Mixed Upper and lower case Block

§ TYPESTYLE #PA: Mixed Upper and lower case Park Avenue

§ TYPESTYLE #ZP: Mixed Upper and lower case Zaph

§ TYPESTYLE #MH: Mixed Upper and lower case Murray Hill

§ TYPESTYLE #SN: Mixed Upper and lower case Snell

§ TYPESTYLE #OR: Mixed Upper and lower case Open Roman

§ TYPESTYLE #RN: Mixed Upper and lower case Roman

§ TYPESTYLE #BR: Mixed Upper and lower case Brush

o Click to view Typestyles

4 - Choose Your IMPRINT: any text you would like, official (such as: institutional, state, academic) seals require documentation, see ** below.

Unless otherwise specified at time of order, imprint will be sized to maximum usable area of the seal proportionally

o FOR RECTANGULAR 1" x 2" SEALS:

§ STOCK SEALS #EMB-M03: your 1-4 lines of text (such as your return address), centered in your choice of one of the above typestyles, suggested maximum is 23 characters/spaces per line, this can also be a 1-4 letter monogram (initials next to one another, no specific placement or sizing) or a stock design , any deviation will be priced as a custom seal

o FOR ROUND SEALS:

§ STOCK SEALS #EMB-M01: TEXT around arcs, stock design , initial or monogram in center, standard borders will be used unless otherwise specified at time of order, suggested maximum is 23 characters, this can also be a 1-4 letter monogram (initials next to one another, no specific placement or sizing) or stock design , any deviation will be priced as a custom seal

§ TOP ARC: such as LIBRARY OF , FROM THE LIBRARY OF, FROM THE DESK OF, FROM THE KITCHEN OF, PROPERTY OF, COMPANY NAME/DATE OF INCORPORATION, ACHIEVEMENT, MUSIC LIBRARY OF, etc.

§ OPTIONAL INNER TOP ARC: try to keep maximum to 10 characters

§ OPTIONAL INNER BOTTOM ARC: try to keep maximum to 10 characters

§ BOTTOM ARC: such as NAME, INCORPORATION DATE, COMPANY NAME, MARRIAGE DATE, etc.

5 - Choose Fixed Position of Die: (fixed position of die, seal can not be rotated, fixed position must be indicated at time of order)

o to emboss from the BOTTOM (such as for envelope flaps, imprint is upright when using the mechanism from the bottom) OR

o to emboss from the TOP (such as for the top of stationery, imprint is upright when using the mechanism from the top) OR

o to emboss from the LEFT or RIGHT (such as for the side of a book or certificate - NOT available for rectangle seals)

6 - Additional STOCK Insert of exact same imprint (optional)

  • For Additional Standard Pocket or Desktop Handle - INSERT #INS1SD: additional 1-5/8"
  • For Additional Standard Pocket or Desktop Handle - INSERT #INSRSD: additional 1" x 2"
  • For Additional Inserts for 2.5" LONG REACH HANDLES: INSERT #2INS2SD: additional 2"
  • For Additional Inserts for 4.5" EXTRA LONG REACH HANDLES: INSERT #4INS2SD: additional 2"
  • Additional Insert for cast seals (Black Epoxy, Brass or Chrome Cast Handle only), standard - additional charge
  • QUANTITY DISCOUNTS are for multiples of exact same seal/handle ordered

Accessories